THIS IS SOME OF THE ITEMS AROUND HERE THAT I AM TIRED OF LOOKING AT.
IF YOU NEED PARTS OR WANT TO TINKER, THESE ARE FOR YOU.

DON'T CALL ABOUT THESE, EVERYTHING WE KNOW IS STATED HERE.
THESE ARE SOLD AS IS. NO WARRANTY, NO RETURN. SHIPPING & HANDLING EXTRA
LOOK AT THE PICTURES BELOW - THIS IS WHAT YOU WILL BE GETTING

When Prather went out of business we made prop molds. These are raw castings for the stainless Prather 215 props.

These have the drive dog slots but no hole through.

You need to cut the pour inlet off a little and chuck in a lathe. Then drill a 3/16 hole through. These are made from stainless so you must use a good drill.

You get 4 castings for only $10.00
WHAT YOU SEE IS WHAT YOU GET. SOLD AS IS. NO WARRANTY, NO RETURN.
Return to MECOA Homepage
©2008 Model Engine Corporation of America, All rights reserved.
MECOA and Modeler Direct are Registered Trademarks of Model Engine Corp. of America
Registered U.S. Patent Office No part may be reproduced without written permission from
MECOA -- P.O. Box 98 -- Sierra Madre, CA 91025 U.S.A.